PRODUCT DESCRIPTION

Also known as a dry cleaner (separator), the Belt Magnetic Drum Separator is used to obtain concentrate, semi-concentrate, and gangue minerals from coarse ferromagnetic materials up to 300 mm in size.

During ore cleaning, the particle size distribution typically spans a wide range. Therefore, separators are equipped with different magnetic configurations and pole arrangements to apply the necessary treatment to the ore.

​

The primary design objective of these separators is to distribute the material as effectively as possible within the magnetic field.

​

The rubber belt is supported by idler pulleys to withstand the impact force occurring at the feed point. The scraper located beneath the magnetic drum is rubber-coated for wear resistance and can be easily replaced.

​

The motor assembly is mounted on the rear drum and consists of a gearbox, belts, pulleys, and motor. If necessary, the belt speed can be adjusted between 0.5 and 2.5 m/s.

 

PERFORMANCE AND CAPACITY

The capacity and performance of the separators vary depending on the material and several criteria, including:

• Mineralogical composition

• Particle size distribution

• Moisture content

• Degree of liberation

• Magnetic properties of the material

• Ratio of magnetic to non-magnetic particles

When selecting the appropriate equipment, the following design criteria must be determined.